deneme bonusu veren siteler deneme bonusu veren siteler bahis siteleri

Scott Marine Surveyor Blog

Subscribe

Via Email:

Archive



A SURVEYOR SPEAKS ON BEHALF OF THE BOAT

Posted On: December 05, 2017


An independent marine surveyor speaks for the boat.

A marine survey is also a useful tool for buyers when negotiating price based on what repairs or upgrades the boat needs. And finally, insurance and lending companies that need to know the true condition and fair market value of a vessel often require it. Insurance company underwriters carefully read through a marine survey to make a determination as to whether the vessel is a good risk, and may require an owner to address certain deficiencies.

But a good survey is more than just an inventory of the boat's equipment. The surveyor will comment on each section of the inspected boat. Finally, near the end of the survey are the recommendations, arguably the most important part.

Recommendations are just that — issues the surveyor found on the boat that may need to be addressed. It's the "may" part that's important here. Typically, a surveyor will list recommendations in order of importance, often as A, B, or C. A-list recommendations (more properly called must-dos) are the most important ones to pay attention to, and you can be sure your insurance company will — not just for your boat, but for the safety of you and your crew. These are issues that, unaddressed, can cause your boat to sink, burn, become involved in an accident, or cause serious injury

Keep in mind that while surveyors inspect a boat with an eye toward industry safety standards, such as those written by the American Boat and Yacht Council (ABYC), they recognize that newer standards were not in place when older boats were built. But some of those standards, like the need for carbon monoxide alarms or proper wiring, are critical enough that insurance underwriters may still require boats to comply with them.

0

STYLING WITH A NAUTICAL THEME

Posted On: November 28, 2017

Dress for success with a Boating theme

 Zodiac Heritage Automatic

The Zodiac Heritage Automatic is the updated version of the iconic swiss made men’s Zodiac Sea Wolf. Since 1882 Zodiac has been making innovative, precise, rugged timepieces. This watch has it all – looks, character and function. Self-winding, stainless steel band, water resistant to 660 ft, suitable for professional marine activity and serious surface water sports, but not scuba diving. Is there anyone who would not love this watch on their wrist?

Propeller Cufflinks

Mr. Cuff Propeller Cufflinks make a handsome gift for the boat lover who needs to be well dressed for Christmas, graduation, wedding or other event. While not sterling silver (and not the high price), this set has a solid silver chrome feel with long lasting construction. Comes with deluxe presentation gift box and a 30 day, no reason return policy.

Classic Nautical Tie

John Williams makes a good tie at a price that won’t make you feel guilty.  If the boat rocks and she accidentally spills her wine (while you rescue her from falling overboard) or the sea spray inadvertently comes over the bow (and drenches you both) you don’t need to fret about a prissy $200 tie. There’s the old saying – the ocean is unpredictable. This classic sailing man’s tie comes in a handsome sheen of blue and white, features a desirable but understated nautical flair, and is 100% pure silk (extremely soft) and is sewn by hand. 

0

THE ART OF CARVING THE TURKEY

Posted On: November 23, 2017

Carving the Perfect Turkey    


Every year, countless families cringe as the annual carve the turkey debate rages on. So in the interest of harmony and Thanksgiving, here's what the pro's say.


Six steps to serving the perfect Thanksgiving bird

by Gerry Brown

Carving, and serving, the perfect turkey

 

Many beautiful Rockwellian Thanksgiving feasts have been spoiled when the golden brown turkey is hacked to pieces by an improperly trained carver. Whether you are looking to improve your technique, confirm that you are doing it right, or getting ready to pass the knife to Junior this year, here's a quick look at the proper way to look good slicing up and giving your family the bird.

 

What you'll need:

 

        a turkey;

        a good, long, sharp knife (an electric carving knife is nice but unnecessary and can often be more trouble than it's worth; if you're just starting out, go with an old fashioned manual model);

        a carving fork;

        an apron;

        a spot to place the meat as it's cut.

 

Step One

A Perfectly Cooked Turkey

Make sure the turkey is done! Sounds simple but several variables can conspire to throw off the pre-cooked time calculations. You want to make sure that you use a real meat thermometer, not one of those pop-up deals. Most times you'll end up with an overdone, dried out turkey and that's a nightmare for carvers. The meat will shred and crumble.

 

Assuming the turkey is stuffed, stick the tip of the thermometer into the stuffed cavity of the turkey. If the turkey is not stuffed, put the thermometer into the thigh pointing toward the body, but make sure it doesn't touch bone. If you are using an instant-read thermometer, don't leave it in while the turkey is roasting. The turkey is done when the thermometer says 160°F in the center of the stuffing or 180°F deep in the thigh; also, the turkey's juices should be clear, not reddish pink when thigh muscle is pierced deeply.

Step Two            

 

The turkey is done. Now take it out of the oven and let it "rest" for 20–30 minutes on the cutting board. Wash and dry your hands and put on your apron if you haven't already. Remove the stuffing from the bird and keep it warm. You are now ready to begin carving. The first thing you'll want to do is remove the leg on one side.

 

Some will tell you to steady the turkey with your big carving fork and use your knife to slice between the leg and the body of the turkey. Others will say to pull the leg gently away from the turkey while you cut with the other hand. Either way, you'll want to use the tip of the knife to probe the area just above thigh to find the joint that connects the leg to the turkey. That's the magic slice point.

 

Once you find the joint, cut it firmly but smoothly. Usually it will cut through with relative ease but if not, check to make sure you are not trying to cut through bone. Once you get the leg off the bone you can cut some meat off the leg. But first separate the thigh from the drumstick by cutting through the joint that connects them. The thigh is simple to carve—just slice the meat parallel to the bone.

 

A lot of people just leave the drumsticks intact because that's the way the kids like them. But if you want to carve them, here's how: hold the drumstick by the small end and rest the big end on the cutting board and slice downward. Don't try to get slices that are too thin. Go for medium-sized pieces.

Step Three

 Before you attempt to carve the breast you need to cut off the wings. Do this in the same way you did the legs. Find the joint near the turkey's body and cut through the magic slice point.

Step Four

Carving A Perfectly Cooked Turkey

Now, this is one of the most crucial and controversial steps. There are two general schools of thought on the best way to carve the breast. Most people like the white breast meat, so this is the step that makes or breaks your carving reputation.

 

There is the traditional method, in which one cuts the breast one slice at a time away from the bird. Another method, sometimes called the "kitchen method" because it is usually done out of view of the guests, involved cutting the entire breast away from the bird and then slicing it into pieces.

 

The traditional method is a little easier and by far the most popular. In the kitchen method you may be able to regulate the thickness of each individual slice a little better, but it should be done by only those who have mastered the traditional method first.

If you're sticking with the traditional method, steady the turkey with your fork and slowly and smoothly carve the turkey breast in downward-slanting slices. Start with a small slice, roughly the diameter of a soda can, and as you cut, the slices will get larger. As you are cutting periodically check to make sure that the slices are even and not thicker on one end or the other. As they come off the bird, stack the slices as neatly as possible on a serving platter. Sliced meat cools fast so serve it quickly or have some piping hot gravy on standby if things cool off.

Step Five

 Repeat step four on the other side of the bird.

Step Six

 Serve it up, say grace, and dig in with the satisfaction of knowing that you are the best carver at the table.

0

PREVENT WINTER DISASTER

Posted On: November 14, 2017



Okay boys and girls, the northeast generally isn’t to kind to boaters who decide to keep their boats in the water all winter. Yet, many of you say that with de-icer, you can survive. It can help, but only in some instances.  I don’t recommend keeping it in the water, but if you do:

Here are three winter disasters a de-icer can help prevent:

  1. Hull Damage

Normal current and wind speeds naturally make water rigs tip, rock and pitch in the water. When freezing temperatures and a layer of ice are added to the equation, the result is a nasty grinding action that can scratch and tear away the gel-coat along the waterline of fiberglass boats. This allows water to sneak into the laminate and further damage the hull. Ice can also get into the plank seams or the bilge of a wooden boat and cause anything from minor cosmetic damage to major leaks.

  1. Dock Lifting

Ice, wind and current are no friend to docks, either, especially if all three elements are thrown together. Because ice expands during the freezing process, the water levels will fluctuate, making it difficult for dock piles to stay firmly in place. Heavy ice flows and ice pressure can shift the dock pilings – or worse, pull them out of their footings entirely. Any watercraft near the dock could be damaged as the dock shifts.

  1. Ice Expansion

Like most substances, water at ordinary temperatures contracts, increasing in density as it cools. At about 4 degrees Celsius, however, water reaches its maximum density and then decreases in density as it reaches its freezing point. Because of this, ice forms on the top of the water first, allowing it to freeze and float, and then the rest of the ice forms below. This simple sequence can be disastrous for both docks and boat hulls. The pressure from ice expansion can crush a hull or dock, causing major damage and compromising the structural integrity of the craft.

Old Man Winter can try as he may to freeze lakes and rivers, penetrate boat hulls and crush docks – but he’ll have a much harder time succeeding if a de-icer is on hand to protect your goods during the winter.

0

A WORD FROM YOUR BOAT

Posted On: November 14, 2017

An independent marine surveyor speaks for the boat.

A marine survey is also a useful tool for buyers when negotiating price based on what repairs or upgrades the boat needs. And finally, insurance and lending companies that need to know the true condition and fair market value of a vessel often require it. Insurance company underwriters carefully read through a marine survey to make a determination as to whether the vessel is a good risk, and may require an owner to address certain deficiencies.

But a good survey is more than just an inventory of the boat's equipment. The surveyor will comment on each section of the inspected boat. Finally, near the end of the survey are the recommendations, arguably the most important part.

Recommendations are just that — issues the surveyor found on the boat that may need to be addressed. It's the "may" part that's important here. Typically, a surveyor will list recommendations in order of importance, often as A, B, or C. A-list recommendations (more properly called must-dos) are the most important ones to pay attention to, and you can be sure your insurance company will — not just for your boat, but for the safety of you and your crew. These are issues that, unaddressed, can cause your boat to sink, burn, become involved in an accident, or cause serious injury

Keep in mind that while surveyors inspect a boat with an eye toward industry safety standards, such as those written by the American Boat and Yacht Council (ABYC), they recognize that newer standards were not in place when older boats were built. But some of those standards, like the need for carbon monoxide alarms or proper wiring, are critical enough that insurance underwriters may still require boats to comply with them

0

EVOLUTION OF BOAT OWNERSHIP

Posted On: November 09, 2017

A millennial offers tips for getting younger boaters on the water

 

Interesting article about the trend of younger people not buying boats. What do you think?

ALEXANDRIA, Va., October 5, 2017 – Both boaters and those who rely on boating to make a living lament that there doesn’t seem to be as many younger boaters these days. The statistics back that up. According to the recently published BoatUS Magazine feature “Why Aren’t Millennials Buying Boats?” (October 2017), approximately 41 percent fewer 20- to 39-year-olds owned boats in 2015 than in 2005. And while millennials may boat about as much as their parents did, the data confirms they are far less likely to own a boat.

Why? Author and millennial Fiona McGlynn, who is a professional management consultant, may have some answers.

Lower incomes, student debt, lack of technical knowledge or mechanical experience, and a culture shift that eschews conventional ownership in favor of renting take their toll on millennial (born between 1982 and 2000) boat ownership. “Young people are not giving up on boating, just going about it in a different way: chartering, borrowing, and riding along,” says McGlynn, a live-aboard who recently finished her first South Pacific crossing along with her husband, Robin.

While owning a boat can be pricey, McGlynn reports, “I’ve met a number of young boaters finding creative ways to get out on the water without breaking the bank, such as millennials who are participating in cooperatives, who share a boat among friends, or who live aboard a boat instead of renting pricey apartments in major American waterfront cities. Several boaters interviewed for the story mentioned the increasing popularity of wake boats, in part because they carry more people and they’re fun.”

McGlynn ultimately writes that, in general, millennials prefer the sharing economy. She asks, why would you buy a ski house, when all you have to do is Airbnb it? She suggests it’s the same with boats. “20- to 39-year-olds love boating for the same reasons their parents did. They see it as an opportunity to socialize, create family memories, and adventures, and unplug from work. Boating has the potential for a watershed moment among millennials.”

The BoatUS Magazine feature also includes creative tips on how young people with no boating, sailing, or fishing experience can get on the water.

0

BEWARE THAT PRETTY FACE

Posted On: November 07, 2017

Get A Survey

It's easy to fall in love with an appealing sheer line, shimmering gelcoat, and gleaming teak, but DON’T let your heart guide you; you need an objective marine survey to avoid buying with rose-colored sunglasses on.

A marine survey is an independent evaluation of a boat's condition and value, performed by a qualified inspector who has no stake in the outcome. In fact, even experienced surveyors will usually hire a fellow professional to do the survey on a boat they're considering, to keep emotion out of the equation. Many boats sit unused and get minimal maintenance. When these boats begin to be sold, a professional evaluation, devoid of the excitement of boat-buying, is even more critical. Here's what a good survey provides:

  • The condition of the boat and its equipment: A marine survey gives a snapshot of the condition of the boat's visible components and accessible structures at the time of the inspection. A survey provides a list of deficiencies as well as needed repairs and focuses on safety. Deficiencies in a survey can be used to renegotiate the sales price or scrap the deal altogether if needed repairs are too expensive or complicated.
  • The value of the boat: Surveyors use pricing guides along with their vast experience in valuing boats. A seller or broker may think a boat has a specific worth, but until a survey is performed, those figures are only guesses. Banks and insurance companies use the survey value to determine loan and insurance hull value amounts. This is also a great tool for price negotiations and can easily pay for the cost of the survey.
  • A budget for repairs and maintenance: Nearly any boat will have some defects and deficiencies; knowing what they are beforehand makes it easier to know how much to budget for the future. Surveys typically provide a list of recommended, prioritized repairs. The most important ones are critical to safety and usually your insurance company will require them to be completed. The rest are things that can be done as you find time and money.
0

Election Day in the United States

Posted On: November 02, 2017

Election Day in the United States of America is the Tuesday following the first Monday in November. It can fall on or between November 2 and November 8. It is the day when popular ballots are held to select public officials. These include national, state and local government representatives at all levels up to the president.


What Do People Do?

On Election Day, citizens of the United States of America can vote by popular ballot for candidates for public offices at local, state and national levels. In even numbered years, federal elections are always held. In years divisible by four, presidential elections are always held. Elections for local and state officials may be held in odd or even-numbered years, depending on local and state laws.

The way in which people vote depends on the state in which they live. In Oregon, all votes are cast by post and all votes have to be received at a given time on Election Day. In the state of Washington, nearly all people vote by post and the envelopes containing the voting papers have to be postmarked with the date of Election Day. In other states, people vote at voting stations, where long queues can form.

0