Steering Wheel Control
Over-steering and over-correcting are common problems. We must know whether the wheel is straight or turned and, if turned, which direction and how far. There isn't room for guessing and making corrections if the boat doesn't turn the direction anticipated.
The Difference Between Steering A Car and Steering A Boat
When a car turns, the rear wheel tracks inside the turn, while when a boat turns, the stern tracks outside the turn, exactly the opposite of what we experience in our cars. Note how the stern could easily strike the dock if the operator isn't aware of the tendency of the stern to track outside the turn.We're all used to driving a car. How much different can steering-wheel control be on a boat? Well, hugely different, in reality, and it can get you in trouble if you don't recognize the distinction. Cars steer from the front while boats steer from the stern. Boats pivot, cars don't. When you steer a car, the front tires turn the front of the car, and the rest of the car follows. Take a corner too tightly and the inside rear wheel hits the curb. When you steer a boat, the rudder, outdrive, or outboard swivels at the stern and directs the thrust in a way that pushes the stern in the opposite direction. Because of this, when taking a corner in a boat, your boat needs room on the OUTSIDE of a turn — the exact opposite of a car. This difference isn't too noticeable on open water, but critical in close quarters.